Systems are very well-suited for multi-layer bottles (from 2 to 6 layers).
The NtN (“Neck to Neck”) option allows for the possibility of duplicating production quantities as it offers the blowing of two bottles per mould.
Container capacity of up to 2 litres.
Maximum mould number: 12 (24 with the Neck to Neck configuration).
Blown necks (needle blower).
Output: up to 6,500 b/h in single-cavity moulds; 11,000 b/h in 2 cavity moulds.
Comprehensive control system, including parison thickness regulator, with an interface for visualizing process parameters and a statistical production control
Integrated dome trimmer as well as transfer system to the same.
Centralized lubrication system.
Automatic start up.
Container demoulding system with deep bases (optional).
Having a single head, regardless of the number of moulds, provides maximum uniformity in the containers, leaving their weight within a very narrow range. This allows reducing the average container weight.
A reduced quantity of energy is required to maintain the wheel in rotation and to ensure the final clamping of the moulds. The single head also helps minimize energy consumption, reducing the number of heaters and heads to a minimum.
Characterized by maximum flexibility, allowing for the combination of different sized containers while maintaining reduced scrap.
Maximum capacity: 2.000 cc
Maximum diameter: 110 mm
Maximum height: 325 mm
Number of cavities: 6
Maximum mould opening: 140 mm
Mould clamping force: 3.000 kg
Depends on bottle type: 3.800
Maximum capacity: 1.500 cc
Maximum diameter: 110 mm
Maximum height: 270 mm
Number of cavities: 8
Maximum mould opening: 140 mm
Mould clamping force: 3.000 kg
Depends on bottle type: 5.000
Maximum capacity: 1.500 cc
Maximum diameter: 110 mm
Maximum height: 270 mm
Number of cavities: 10
Maximum mould opening: 140 mm
Mould clamping force: 3.000 kg
Depends on bottle type: 6.000
Maximum capacity: 1.500 cc
Maximum diameter: 110 mm
Maximum height: 270 mm
Number of cavities: 12
Maximum mould opening: 140 mm
Mould clamping force: 3.000 kg
Depends on bottle type: 6.500
Mainly they are used for small containers of dairy products or a “single serve”.
Maximum capacity: 200 cc
Maximum diameter: 60 mm
Maximum height: 135 mm
Number of cavities: 8 & 16
Maximum mould opening: 140 mm
Mould clamping force: 3.000 kg
Depends on bottle type: 8.000
Maximum capacity: 200 cc
Maximum diameter: 60 mm
Maximum height: 135 mm
Number of cavities: 10 & 20
Maximum mould opening: 140 mm
Mould clamping force: 3.000 kg
Depends on bottle type: 10.000
Maximum capacity: 200 cc
Maximum diameter: 60 mm
Maximum height: 135 mm
Number of cavities: 12 & 24
Maximum mould opening: 140 mm
Mould clamping force: 3.000 kg
Depends on bottle type: 11.000
Because the PEAD blow moulding machine is the basis of a bottle manufacturing line, it is necessary to have access to auxiliary equipment that may be optionally supplied as part of a turnkey project.
Includes:
Urola supplies these and ensures their installation through a turnkey concept, taking responsibility for the operation of the line.
Having only one head, regardless of the number of moulds, makes Urola’s rotary machines ideal for multi-layer containers requiring multi-layer heads.
Our service begins with a customer consultation regarding container design, taking the following factors into consideration::
We use 5 axis CNC Machining Centers and other auxiliary machines for the manufacture of moulds with the highest quality.
This service is covered by Urola when it is required to determine the validity of the container when it is a new packaging development.
We accompany the customer in the maintenance of the moulds during their useful life to ensure that the conditions of the process are maintained in optimal conditions.
For this we replace worn parts, repairs, check air outlets, check cooling circuits, etc.
A cooling system is integrated within the very mould. Moulds are manufactured in duralumin with stainless steel, treated neck adjustments.